Old School, Old skool, or should we just say Olds Kool, Fulmer V2 Helmet review-- Crash and Burn Stories-- Marathon Post.

Be prepared to take a few minutes. Unlike my usual style of posting, this one isn't short. If you don't have time for a longer read, come back later. I reveal a lot here. Part of which has been a public secret until now.

This post is about my quest for the perfect helmet, and stories of why this quest has come to be, more than once, and why I find it so difficult.

Minnesota has a Limited helmet law. If you are under your learner's permit, you must wear a helmet. If you are under 18 years of age, you must wear a helmet. If neither apply to you, it is your choice. (Funny because we have a mandatory seatbelt law in a car(cage) with airbags. Go figure.

When I had my motorcycle learner's permit, I had a black full faced helmet. It was a Fulmer.

I hated wearing this thing with a burning passion. I couldn't wait to ditch it. I got my motorcycle endorsement, and of course, ditched the helmet.

I rode most of my riding years without a helmet. Then I got into a car accident. I was going through an intersection. I was in the right hand through lane. There was no turn lane here, and lady made a last minute right hand turn from the left lane into my bike. I was ejected, and was hurled through the air like Superman. She was in a Suburban, and said she didn't see me. Regardless, she made a turn from the wrong lane. I totaled that bike. I was injured pretty bad, and couldn't walk for about a month. I should have sued her ass, but I was too young, too naive, and I'm not the suing type of person. That accident freaked me out bad. I was also too new of a motorcycle rider to realize just how bad the motorcycle riding bug had bit me. I swore, I'd never ride again. I got married after that, and it wasn't too long before I couldn't hear, or watch another motorcycle going down the road without having to turn my head as they passed by to watch them with envy in my gaze. This went on for quite some time. My wife could see it was slowly killing me, and making me not the person she met, or married. We jointly agreed that I could get another motorcycle, but I had to wear a helmet. I agreed. I got another bike, I got another helmet. This time a Bell half shell DOT approved helmet. Since I've never ridden with a windshield, and never will, I refer to these DOT half helmets as (kites, or wind catchers if you will). I also have a small head, and am not a really big guy, so I looked like Marvin the Martian wearing it. Mushroom head is what some people like to call it. I F'n hated that thing so bad, it made me not want to ride if I had to wear it. Gradually, I stopped wearing it, and gradually, my wife begrudgingly accepted that I was going to ride, and I was going to do it without a helmet on my head.

Years passed, and I got in another minor accident. This time it was my fault. Too much speed, not enough time to slow. I slid, then high sided, and was ejected. (Stupid rookie mistake). Guess I should have taken those advanced rider courses. Needless to say, I survived. The bike was fixed, and I continued to ride without a helmet.

Last summer, July 20th, 2008, to be exact was a riding, life changing day for me. I have not spoke of this on my blog until this post. I got in a pretty scary motorcycle accident. Again my fault. (By the way, That you tube Video I just posted of Custom Paint repair techniques was my own bike getting repaired after my crash from last summer. I healed, and had the bike made "ready to ride" so I could ride the rest of the season, then had it fixed for real this last winter. It was in the shop until early- to mid Spring.)

Anyway, back to the crash...

I was planning on heading down to our family cabin, which is about an hour and a half south of my house. It was going to be a beautiful ride, and when I got there I was going to mow the lawn, and maybe wet a line and see if some fish were biting, then visit my folks on the way home. I only made it about 15 minutes south of my house before the possibly near fatal moment happened. I was traveling Southbound on Interstate 35W, and getting ready to exit onto State Highway 10. The exit ramp off the freeway- entrance ramp onto 10 basically just takes up the shoulder. There is no other room for this ramp. Thusly, within inches of the outside white line alongside the ramp is a guard rail. I was traveling the speed limit on the freeway at 70 MPH, and slowing just slightly for the exit, so going approximately 65 MPH, hugging the right side of the lane by the guard rail. I must have ran over something metal, because I heard a metal clanging sound, and I looked down and to my left to see what it was. I counter-steered just enough to scrape the guard rail, then bounce off of it, and down I went at about 65 MPH. I had no helmet, and was wearing only jeans, T-shirt, and boots. I slid across the pavement on my back , my side, and my right arm. Luckily I had a Grab-it Pack on, and It took the brunt of the slide on my side. I got nasty road rash on my back and my right arm. The arm by the elbow was ground almost to the bone and the knuckles on my right hand WERE down to the bone. As I slid down the road, I remember consciously thinking to myself as I was scraping the guard rail, that this can't be happening. This is like a F'n nightmare! And then I thought (excuse my French), "OH FUCK, I'M GOING TO DIE!" Then came the pavement, and the slide. My next two thoughts were "keep the head up. & Please God don't let my head hit the pavement." I stopped, and couldn't believe I was alive. I could not believe what had just happened. I could not believe no one ran over me. I couldn't believe what my arm and my hand looked like. It took a while for the pain to kick in due to the adrenaline, and partial shock. After a while it was pretty extreme, but I knew I'd have to deal with it. I had no choice. Moment's later people came to help get the bike out of the road, and make sure I was O.K. I thanked them all for stopping. I was lucky in a sense that this was a busy road, because what had happened to me did not go

unnoticed. I tried to use my cell phone to make a call to my wife, and tow truck, but my cell phone was in the Grab-it Pack, and was crushed from the impact. A short while later a State Trooper arrived on the scene to help me. He was a great guy, and rides motorcycles himself. He was compassionate, helpful, kind, and caring. I used to have a grudge against most cops in general, till this moment. I realized that they aren't all out there to "nab" us and give us tickets, but that they can, and will also help in a time of need. (By the way. I have a quote that says..." May all your encounters with the law start with the words, "Nice Harley!") Yeah, he said it.

The tow truck came, I actually helped him load my bike on the flat bed, and rode home with him to my house, and dropped off the bike there. It was a day the bike shop was closed. My wife was home when the tow truck backed up the drive. She saw me, and thought at first that my bike just broke down or something until I hopped out the cab of the tow truck and she saw all the road rash. I said at that point, "Yeah, I'll wear a helmet now. " She never even asked me to stop riding, ever. Bless her heart. The one time I declared I would stop riding, I said it on my own free will. Stupid me. What was I thinking. While recovering, people would ask me, "Are you going to stop riding?", That's like asking someone who doesn't ride, who has had an asthma attack, are you going to stop breathing? My response... "I'll stop riding when they bury me." Motorcycle accidents suck. Don't get me wrong. For those of you who have never had one, I hope you never do. For those of you who have, and continue to ride. You know what I'm saying. For those of you who have crashed, and gave it up. Well I guess the riding bug never bit you as hard as it bit me. I've ridden more years than not. It's not just something I do, It is part of who I am.

Needless to say, I did say I'd wear a helmet now, so this brings me to my quest again for the perfect helmet. Mind you, riding without a windshield makes a huge difference on what you can and can't wear comfortably without feeling like you head is going to be torn off at anything over 55 MPH.

I hate full face, so that was out. I hate mushroom head, so that limited my choices. I bought two different Novelty style half helmets, and thy didn't fit very well, and were made poorly so all they did was shift, and catch wind. These suck! IMO. Add them to the collection of worthless helmets. So let the quest continue.

This spring I was at the annual Spring Flood Run and took some pictures. Remember that Old Skool chopper? It had an old skool helmet hanging off the handle bars. I thought to myself "That ain't so bad. I might be able to wear one of those." It looked pretty cool, and might just be the ticket. So I did some research on line. I found a Fulmer 3/4 open face Old skool bobber style helmet that IS DOT approved! It is low profile, fits nicely, looks cool, no mushroom head, and is I believe the ticket for me. It is very hard to find a perfect helmet if you can't test ride with them, so I believe many of you also have a collection of helmets you don't use. I did a lot of research before going out and buying one of these. It does fit snugly, does vent-breathe, is extremely lightweight,, and has very little drag, (even at 80 MPH!) and comes with a snap on visor, and you can purchase optional bubble facemask. You won't find them in most stores. You have to go to a dealer that sells Fulmer helmets, have your head measured, and special order it. I've had mine for a few weeks now, and I love it. I had to buy riding goggles though because the helmet changes the course of wind flow by your eyes, so shades don't work so well, unless you don't mind dry watery eyes. The color selections are fabulous! Since it's 3/4, it can be warm. This can be good and bad. I guess it depends on the weather. If you are into old skool, this might just be the ticket for you!

If you want to see pictures of them, read other reviews, etc., just Google "Fulmer V2 helmet".

This will bring up lots more information. By the time I was done researching, reading great reviews, etc., I was 99% sold on this helmet. All that was left was to see someone with it on. Since I couldn't find one at a store, I couldn't find out what they looked like on my head. I had to rely on the internet for this. So I searched for images of it. I did have a problem finding pictures of people actually wearing the helmet. Everyone showed pictures of the helmets, but I wanted to see for myself if the claim of "No mushroom head" held any merit. I was only able to find one YouTube video of a guy wearing it while riding that sold me on it. I figured for anyone interested, here is a couple of pics of me with it on my noggin.

LOOK MA, NO MUSHROOM HEAD!

Leaf spring chopper sculpture

While working, and at one of my companies client's house, my co-worker and I got to take a peek at our client's workshop in the back yard where he makes fanciful things like custom made pens, wine bottle stoppers, and Oh yeah, a leaf spring chopper. How cool is this thing!

I love the Diamond plate for the headlight.

Yeah, I know I look like a dork sitting on it, but I couldn't resist!

I asked him if he ever thought about making them and selling them at bike shows, and he said yes, but that would be work. He's retired, and just likes to do things once, and sit back and enjoy them.

I envy this guy!

Largest Ever Ride To Work Day Expected

Media Release: For immediate use
Date: 05/15/09
Subject: Motorcycle and Scooter Ride To Work Day

Largest Ever Ride To Work Day Expected

Monday, June 15, 2009

The 18th Annual Ride To Work Day is a month away, and this year the weaker economy is causing many commuters to turn to motorcycles and scooters to save money on transportation. These new everyday riders are finding cycles and scooters to be an economical, efficient and enjoyable way to get to work and around town. Because of the world-wide depression, this year is expected to be the largest Ride to Work Day demonstration ever, according to Ride to Work, a non-profit organization.

According to the United States Census Bureau and the Department of Transportation, over eighty million cars and light trucks are used for daily commuting on American roads, and about 200,000 motorcycles and scooters are a regular part of this mix. On Ride To Work Day, the practical side of riding becomes more visible as a larger number of America's 8,000,000 cycles are ridden to work.

Ride to Work Day helps demonstrate how these vehicles make parking easier and help traffic flow better. Studies have shown that across equal distances, commuting motorcyclists reach their destinations in less time than those using automobiles, that motorcycles and scooters consume less resources per mile than automobiles, and that they take up less space on roads. Motorcycle and scooter riders seek improved employer recognition and support for this form of transportation, and more public and government awareness of the positive value of riding.
Changes to the Ride To Work website include new forum areas, and additional free promotional support materials.


Press release also available in Word and PDF formats.






Contact Ride to Work Day, a 501 c4 nonprofit organization, at:
POB 1072, Proctor, Minnesota, 55810 USA
http://www.ridetowork.org/?utm_source=rtw2009_5_15&utm_medium=email
218 722 9806
propaganda@ridetowork.org

Mission Statement:
Advocating and supporting the use of motorcycles and scooters for transportation, and providing information about everyday riding to the public.

Some Affiliated Countries:
Canada, Germany, Philippines, England, Germany, France, Israel, Turkey, Ecuador, United States, and many others.

Newsletter:
Sample issues of 'The Daily Rider' newsletter are available for download at:
http://www.ridetowork.org/the-daily-rider/?utm_source=rtw2009_5_15&utm_medium=email

History:
A brief history of Ride to Work Day is available for viewing at:
http://www.ridetowork.org/ride-to-work-day-history/?utm_source=rtw2009_5_15&utm_medium=email

Fact Sheet:
A transportation motorcycling fact sheet is available at:
http://www.ridetowork.org/transportation-fact-sheet/?utm_source=rtw2009_5_15&utm_medium=email

Photos and Artwork:
Motorcycle and scooter commuting photos, ads, posters, banners, photos, illustrations and other artwork is available at:
http://www.ridetowork.org/signs-posters-cards-propaganda-art/?utm_source=rtw2009_5_15&utm_medium=email

©2009 Ride To Work

Ride on,

Torch

HJC CS-2N Blade MC-5 Helmet Review

HJC CS-2N Blade MC-5 Helmet Review

Last year I needed another helmet just in case I needed to take a passenger with me for a ride. I decided to get another open faced half helmet. I was browsing at Full Boar in Hurst Texas during their Christmas Shoppers Storewide Clearance Sale when one caught my eye. I think it was the interesting flaming skull looking graphic that caught my eye. It was made by HJC and the model was CS-2N and their website calls it the Blade MC-5. It was a half helmet and it was D.O.T. approved. Here is the information from the HJC website:

Thermoplastic Alloy Shell: Lightweight, superior fit and comfort using advanced CAD technology.
Nylex Interior: For added comfort.
Two Forehead Vents: Delivers cooling air.
Aerodynamic Visor: Low-profile design.
Removable “Zip-out” Neck Curtain: Easy to remove. Optional earflaps with speaker pockets.
DOT Approved
SIZES: XS-XXL

I tried several on and the medium size fit me well. The neck strap seemed to land more on my chin than neck which felt much more comfortable than the Vega XT. It also did not feel like it stood as tall on my head, like the Vega Half Helmet. The shape fit my head nicely and CS-2N was balanced well. I made my purchase.

The faux visor is indeed low profile and did not catch the wind as bad as the Vega’s visor did. It offers little shade from the sun, and apparently, is just for looks. For some reason, this Blade already had an Echo Products Quick Connect installed on it, so I did not have to purchase one and install it myself like I did the Vega. Another plus is that along with the standard two D Rings on the Nylon Retention Band, (strap) it has a snap right below the D Rings with a corresponding snap on the end of the long strap for snapping together after the helmet is buckled. This keeps the long loose strap end out of the way. I really like this feature because with the Vega, after it is buckled with the Quick Connect, I had to wrap the long end around the D Rings anyway to keep it out of the way. I guess I’m just too lazy to cut it.

The two Forehead Vents are well hidden under the visor and can only be seen when the visor is removed. Each vent is around 1” wide and ¼” high. They are a lot larger than the vents found on the Vega XT, although they do not have way to close them. It also has a Removable “Zip-Out” Neck Curtain, which I have given a real good workout to this spring taking it on and off as the temperamental Texas temperatures fluctuated cold to hot. It is slightly difficult to get the D Rings and Quick Connect ends through the strap loops on the Neck Curtain.

This Spring I stopped at Cycle Gear and picked up a universal snap on clear face shield, to try and use in the rain, and I found out the Blade does not have snaps to hold the visor on. The MC-5 has two screws on each side and a guide stud in the center to hold it on. For the record, because of the curve of the helmet the “Universal” shield would not stay snapped on the Vega Half Helmet either. Back to the drawing board or invest in a full face.

The HJC CS-2N Blade MC-5 Half Helmet has been my daily wear on my commute to and from work daily. It has functioned for me flawlessly. It is extremely comfortable on my head and I would recommend it to anyone. Torch gives the Blade a M.M.M. Rating of 8 out of 10.

Ride on,
Torch

Look In the Direction You Are Traveling...

Even If it’s Backing Up!

No, this is not an article about Target Fixation.

So far I have helped teach four of my teenagers how to drive an automobile, and only have two more to go. I do have some hair left, but it is rapidly graying. One of the first things I try to drill in their impenetrable, all knowing heads, is to always look where you are going, especially when backing up. They always seem to have a problem with watching where they are going when backing up.

The main problem is not that they don’t initially look behind them before backing, its continuing to look while they are backing. They tend to turn back around while they are still moving backwards, instead of waiting until the vehicle has come to complete stop. And, as you know, all kinds of things can pop up behind you when backing up.

What does all of this have to do with motorcycling? Well, the same principle applies with motorcycles. You need to look in the direction you are traveling at all times, even if it is while backing up. Too bad I don’t always follow my own advice…

After commuting home from work one day I found my ’98 Ford Explorer parked fairly close to the garage door. We try to keep it parked back down the driveway so I can ride around the left side on the grass to get the bike around it and into the garage. I’m sure one of my kids did it. Anyway, I decided to be lazy and get the bike inside anyway.

I pulled around the left side into the yard and this time I pulled passed the explorer and further to the left. I was going to back into the space in front of the Explorer and down into the space in front of my ’01 Windstar, which was parked further down the driveway, and then pull into the garage. I turned the front wheel to the right, glanced behind me and started backing the V-Star 1100 back and to the right. Unfortunately, I was not looking behind me as I was rolling backwards.

In my own defense there is also a small tree to the left of the driveway I had to watch out for. Well, I was slowly rolling backwards, I thought, into the driveway when I heard and felt the crunch. I think I even heard my Mistress, (my 2003 V-Star 1100), yell, “Ouch, you moron, watch where you are going!” The bike had stopped moving and I turned around to see the left rear turn signal stalk had ran into the Explorer’s bumper and had bent the stalk forwards slightly.

After dismounting and inspecting closer the turn signal had bent at an assembly joint and the Star Turn Signal Visor was dented down. I loosened the bolt and straightened the turn signal stalk. Then I just used pliers to bend the visor back into shape as best I could. I was thankful that was all my carelessness caused. Mistress said, “Be more careful and never let it happen again”. I sighed, “Yes, Ma’am!”

What is the moral of the story? Practice what you preach, and look in the direction you are traveling at all times.

Ride on,
Torch

Biker Wannabe Cartoon

Fog Off! Review

Fog Off! Review

This winter on my daily commute ride I got to experience something new to me. Being blessed most of my life with good vision; I’d never had to battle fogging glasses before. Now at the start of my middle ages I found myself having to hold what I was reading farther and farther away to read it and having a hard time with small text. Alas, I’m getting old. Now I wear reading glasses, even as I’m writing this. I currently ride my V-Star 1100 wearing a half helmet and I wear either sunglasses or goggles with various colored lenses, depending on conditions, for eye protection.

As winter pulled us farther and farther away from the sun, the temperatures started to drop. It wasn’t long before I started observing a strange phenomenon, usually in the morning. I was riding with clear riding glasses because it’s dark in the morning when I leave for work. Every time I slowed down and came to a stop my glasses were fogging up on the inside. It would clear up when I started moving but eventually you just got to stop.

My ability to see got poorer as the temperature dropped. I finally purchased a neoprene riding mask to keep the icy wind of my face and that made it even worse. The mask seemed to direct my breath strait onto the inside of my glasses. Now even moving it would fog. I remembered back to the days I had a diving mask and you could apply spit to the inside lens of the mask to keep it from fogging. So, I tried it. It did not work of course. I switched to goggles and it did not help. It got to the point that it was scary to have to slow down and stop. It was time for me to do something if I was going to continue to ride.

I remembered reading an anti-fog test comparison once on web Bike World. So I decided to stop in at Cycle Gear and see what they had. The helpful salesperson handed me a bottle of FOG OFF! It came with its own small microfiber applicator cloth. It comes in a small 29.5 ML pump spray bottle and states MADE IN U.S.A. The bottle claims it is made with Exofogonium 3, whatever that is. The directions simply read:

SHAKE BEFORE USE:
APPLY FOG OFF TO
SURFACE, COVERING
COMPLETELY BUFF WITH
SOFT CLOTH UNTIL CLEAR.

I applied some to my clear night riding glasses according to the directions before my morning commute. Well, I don’t know what is in FOG OFF, but it worked. After riding about a week I started noticing some dampness distortion on the inside of my riding glasses, so I reapplied FOG OFF and it went away. One application seemed to last about a week for me. I cannot say this is the best anti-fog solution out there because I have not tried any others. I will say that it performed and lasted as well as I expected. I now keep the bottle of FOG OFF and cloth in my saddlebag. Torch gives FOG OFF! a M.M.M Rating of 8 out of 10.

Ride on,
Torch